English
العربية
Français
Pусский
Español
Português
ኢትዮጵያዊ
Melayu
Bahasa indonesia
हिन्दी
فارسی

Home / Solutions / Silo Construction Scheme - Granary

Silo Construction Scheme - Granary

Publish Time: 2024-04-16     Origin: Site

As a common storage facility, silos are widely used in agriculture, food processing and chemical industries. To ensure the safe, stable and efficient operation of silos, the design and implementation of its construction scheme is very important. This paper will introduce a typical silo construction scheme, aiming at assisting related construction personnel in silo construction and maintenance.

I. Design and site selection

1, Design principles

In the design process of silos, the following factors should be considered:

- Storage capacity: Determine the capacity of the silo according to the number of required storage materials, and calculate the density, fluidity and other characteristics of different materials.

- Structural stability: The design of the silo should take into account its carrying capacity to ensure sufficient stability under various load conditions.

- Dust and moisture proof: the design of the silo should take into account the characteristics of the material, and appropriate sealing measures should be taken to prevent the entry of dust and moisture.

- Ventilation and exhaust: The design of the silo should take into account the heat and gas generated during the storage and transportation of materials, and adopt a suitable ventilation and exhaust system to ensure the circulation and quality of the air in the silo.

- Convenient operation: the design of the silo should take into account the convenience of the operator, reasonably arrange the entrances and exits, and be equipped with the necessary safety facilities and equipment.

2, Principle of location selection

The siting of silos should consider the following factors:

- Geological conditions: Choose a solid and stable foundation to avoid geological disasters such as settlement and slip.

- Soil conditions: Select a plot with suitable soil to facilitate the construction of the foundation and the stabilization of the silo.

- Surrounding environment: Avoid dangerous environments such as open flame sources and flammable materials to ensure the safety of the silo.

- Convenient transportation: choose a location with convenient transportation to facilitate the entry and exit of materials and the operation of personnel.

II. Construction process

1, Foundation construction

Foundation construction is the foundation of silo construction and includes the following steps:

- Land leveling: remove weeds, stones and other obstacles on the surface to ensure the smooth progress of construction.

- Foundation pit excavation: excavate the foundation pit according to the design requirements to ensure the base area and depth of the silo.

- Foundation pouring: Concrete foundation is poured in the foundation pit to provide stable support for the silo.

2, Silo structure construction

Construction of silo structure includes the following steps:

- Steel processing: according to the design requirements of steel cutting, welding and other processing, and rust prevention treatment.

- Silo assembly: The processed steel is assembled according to the design drawings to ensure the accurate connection of each component.

- Silo installation: Lift the assembled silo onto the foundation, adjust and fix it to ensure the stability of the silo.

3. Construction of silo closure and ventilation and exhaust system

Construction of silo closure and ventilation system includes the following steps:

- Exterior wall construction: The outer side of the silo should be painted, insulated or installed with outer wall panels to ensure the dustproof and moisture-proof effect of the silo.

- Ventilation and exhaust system installation: according to the design requirements, install ventilation pipes and exhaust equipment to ensure the quality and circulation of air in the silo.

III. Construction safety and quality control

1. Construction safety control

During the construction of silos, the following safety matters should be noted:

- Operators should wear protective equipment, including hard hats, non-slip shoes, etc.

- The lifting operation shall be carried out in accordance with the regulations to ensure the safety of the lifting process.

- Clear warning signs and safety protection measures shall be set up on the construction site to prevent personnel from straying into dangerous areas on the site.

2. Construction quality control

During the construction of silos, attention should be paid to the following quality control requirements:

- Construction personnel shall carry out construction in accordance with the design requirements to ensure the structural stability and sealing performance of the silo.

- Quality inspection of key parts (e.g. joints, welds) to ensure compliance with relevant standards.

- Pay attention to the cleanliness of the construction site, and clean up the construction garbage and waste materials in time.

IV. Construction acceptance and maintenance

1. Construction acceptance

After the completion of the construction of the silo, acceptance shall be carried out to confirm that the construction quality and safety meet the requirements. Acceptance includes:

- Structural integrity: Check all parts of the silo to ensure that there is no obvious damage and deformation.

- Sealing performance: Check the sealing effect of the silo to prevent the penetration of dust and moisture.

- Ventilation and exhaust system: Check whether the ventilation pipes and exhaust equipment are working properly.

2. Maintenance

After the construction of the silo is completed, regular maintenance should be carried out to ensure its long-term stability and efficient operation. Maintenance includes:

- Cleaning and maintenance: clean the debris and dust inside and outside the silo regularly to keep it clean.

- Check and repair: check the structure and equipment of silo regularly, and repair or replace the problem in time.

The establishment and implementation of silo construction scheme is an important guarantee to ensure the safe, stable and efficient operation of silo. This paper introduces a typical construction scheme of silo, including design and site selection, construction process, construction safety and quality control, construction acceptance and maintenance. It is hoped to provide some reference and guidance for relevant practitioners in the process of silo construction and maintenance.


​Copyright © 2020 WINCOO ENGINEERING CO.,LTD

Support By:Leadong