Automatic Advanced Two-Stage Hydraulic Jack for Tank Construction Machinery

The hydraulic jacks is mainly used in the inverted construction of vertical cylindrical steel storage tank (hydraulic jacking method) and inverted construction of vertical cylindrical low temperature storage tank.

Product Features

Our hydraulic jacks for tank construction are an essential tool for any construction project involving the lifting and positioning of storage tanks. These jacks have been specifically designed to meet the rigorous demands of the construction industry, with features that make them both durable and incredibly reliable.

One of the key features of our hydraulic jacks is their ability to lift heavy loads with ease. This is achieved through the use of powerful hydraulic pressure, which is able to generate a tremendous amount of force. Additionally, our jacks are designed to be extremely stable, with a wide base that prevents them from tipping over even when under heavy load.

Another advantage of our hydraulic jacks is their versatility. They can be used in a variety of different construction settings, including both indoor and outdoor environments. This makes them an ideal choice for construction sites where multiple tanks need to be lifted and positioned at once.

Overall, our hydraulic jacks for tank construction are an essential tool for any construction professional looking to streamline their work and improve their efficiency. With their combination of durability, reliability, and versatility, these jacks are sure to be a valuable addition to any construction project.

Composition of hydraulic jacks

I. Electrical control system: power distribution box, centralized control box (operation table) and pump station control box.

II. Hydraulic control system: hydraulic jacking pump station, high pressure ball valve, high pressure hose and oil tank, etc.

III. Jacking hydraulic cylinder: hydraulic cylinder, wire rope, such as rod device, hydraulic cylinder roof device, hydraulic cylinder support rod, etc.

Structural characteristics and principle of hydraulic jacks

1, The relief valve controls the pressure of the system to maintain constant by adjusting the handle of the relief valve so as to realize the functions of pressure regulation, pressure stabilization, or pressure limitation (preventing overload); the clockwise rotation indicates pressure going up while the reverse indicates going down. See Figure 1-8 Hydraulic Control Section;

2, This valve is mainly used for safety protection in this set of equipment. During the actual operation and application of the equipment, the handle of the high-pressure ball valve is rotated to control the flow or cut-off of hydraulic fluid;

3. Hydraulic jack section

Technical parameter of hydraulic jacks

Model/Parameter	Max   service pressure	Max   output force of single hydraulic cylinder	Max   stroke of hydraulic cylinder	Hydraulic   cylinder lifting speed	Oil   pump flow	Motor   speed	Motor   voltage	Motor   power	Working   environment temperature
YT10-2200C	24Mpa	10T	1250mm	190mm/min	14.4L/min	1440r/min	~380V	5.5kw	-15~50   ℃
YT10-2700C	31Mpa	10T	1400mm	270mm/min	7.2L/min	1440r/min	~380V	5.5kw	-15~50   ℃
YT12-2700C	31Mpa	12T	1400mm	250mm/min	7.2L/min	1440r/min	~380V	5.5kw	-15~50   ℃
YT18-1700C	24Mpa	18T	1240mm	175mm/min	7.2L/min	1440r/min	~380V	4kw	0~50℃
YT18-2000C	24Mpa	10T	1240mm	175mm/min	7.2L/min	1440r/min	~380V	4kw	0~50℃
YT18-3000C	25Mpa	18T	1600mm	187mm/min	7.2L/min	1440r/min	~380V	5.5kw	-10~60℃
YT25-2700C	31.5Mpa	25T	1650mm	175mm/min	7.2L/min	1440r/min	~380V	5.5kw	-10~60℃
YT25-3000C	29Mpa	25T	3200mm	160mm/min	7.2L/min	1440r/min	~380V	4kw	-10~60℃
YT30-2700C	29Mpa	30T	2050mm	130mm/min	7.2L/min	1440r/min	~415V	4kw	-10~60℃

Construction site photos of hydraulic jacks