 |
| Quantity: | |
|---|---|
WPM-III
WINCOO
8460902000
Head polishing machine is suitable for various stainless steel oval, butterfly, and conical head polishing. From 60-400 mesh and mirror polished or brushed matte. Head polishing machine can achieve low cost, high efficiency, high quality, effectively solve the workers into the tank polishing safety and occupational disease.
This machine is composed of cross main engine, tank polishing head, electric control system, pneumatic system, rotaring table and turning roll.
1. The moving stroke of the column is 1600mm, the moving stroke of the electric arm is 3000mm, and the sliding block is used to lift the driving mechanism and other components.
2. The materials of the column and arm are 500x300x10mm and 250x150x8mm square tubes respectively.
3, the arm is driven by the gear, rack and reducer; The cylinder is driven by sprocket, chain and reducer.
4, the arm moving speed (up and down, left and right) is driven by frequency conversion, the frequency is adjustable.
1, Dish polishing head and tank polishing head are used for grind and polish dish on rotaring table and tank on turing roll.
2, Adaptive constant floating structure, can be adapted to the workpiece ovality ≤50mm.
1, Electric cabinet: operator station,actuators, control loop. Actuator including: contactors, relays, variable-frequency drive etc.
2, Pneumatic part:pressure gauges, cylinders, pipes and other component,to achieve the polishing head feed/return and adaptive constant floating structure.
3, Electric control system and pneumatic system installed in the same Cabinet.
1. Diameter is 800mm, maximum load of rotating bearing is 2t;
2, frequency conversion speed regulation, and equipped with cylinder head sharing fixture, the maximum clamping workpiece diameter of 4300mm;
3, manual screw clamping, automatic centering.
| Polishing Motor power | 4kw |
| Belt size | 1880 × 50mm |
| Buffing wheel size | 300*50*32mm |
| Dish rotaring table motor power | 1x0.75kw |
| Dish rotaring table speed | 1-30rpm |
| Variable-frequency drive Tank turing roll motor power | 2x1.5kw |
| Variable-frequency drive Tank turing speed | 1-50rpm,variable-frequency drive |
| Polishing efficiency | Head 4-6 (m²/h); tank 8-12 (m²/h), Two polishing head,efficiency doubled |
| Power | AC three-phase 380V,50HZ |
| Input power | 16-20kw |
| The gas source | 0.6 m³/ h ; 0.4 ~ 0 6Mpa |
| Processing noise | ≤75db(2 m measuring distance away from polishing head) |
| Machine dimensions | L*W*H 6200x1500x3150mm(Foundation need build according to the drawing ) |
We suggest: a, 3M brand made in US.
b, VSM brand made in Germany.
c. NCA brand made in Japan.
Advantages: a. Ra≤0.1um and very good mirror finish.
b. hairline finish(Broken lines or snow line).
Surface Finish: 8K mirror finish or hairline finish
Hemp wheel
Cloth wheel
Flap wheel
Non-woven wheel
Solid Wax
1, Add another polishing head on tank polishing end to improve efficiency.
2, Long shaft polishing head
3, Automatic waxing system: price has contain electrical control part. (a wax barrel can be equipped with six guns)
4, Cone inside polishing head: if you want cone inside polish, we need design one small column for dish polishing head.
5, Dust collector
