 |
| Quantity: | |
|---|---|
WINCOO
A special equipment is developed with grinding wheel and abrasive belt as abrasive tools, aiming at high pressure heavy container and combining the characteristics of new high efficiency strong abrasive belt and high speed grinding wheel. It is the ideal equipment for polishing heavy boiler, stainless steel container and similar large and medium-sized tank.
The machine consists of CNC cross manipulator, multifunctional powerful grinding abrasive wheel and belt head, dust removal system,electronic system and pneumatic control system.
It is applied to grinding and polishing the residual height of the longitudinal and circumferential welds on the surface of the outside of the cylinder, grinding and polishing the surfacing layer of the inner wall of the cylinder and cleaning the longitudinal and circumferential roots of the cylinder, such as:
(1) grinding of the internal and external longitudinal and circumferential welds of the tank:
(2) grinding of the stainless steel surfacing layer inside the tank;
(3) Grinding of surfacing layer on the inner surface of various head and butt welding slope mouth.
Workpiece Diameter ranges | φ550mm~φ5000mm |
Minimum Diameter required while with Dust removal system | ≥φ1400mm(Internal longitudinal welding reinforcement part grind required minimum Diameter ≥φ2400mm,If less than φ2400mm, needs to notice before manufacturing) |
Maximum workpiece/vessel thickness | δ≤230 mm |
Single section of vessel maximum length | L≤4500 mm |
Workpiece materials | SS. CS |
Width of welding seam | ≤90 mm |
Surface roughness | Ra12.5 |
Machine working environment | |
Power | Three phase AC 380±10%,50HZ±2% |
Temperature | 10-55ºC |
Maximum humidity | 98%(35ºC) |
1, It consists of base hold, level adjustment unit, column, rotating device, power driving system, Mechanical locking mechanism,cross slider/carriage, beam and related moving system. Rotating device between Base hold and column is driving by electricity.
2, Cross slider utilize reducer and Ball screw drive to control up and down. Beam front and back moving is driven by reducer motor and gear rack.
3, Column and beam guide rails are the oversea imported heavy load straight guide. Beam both ends can be equipped with multifunctional and powerful abrasive wheel and belt,dust removal system while it is also considered to leave other grinding &gouge head interfaces.
4, There is lift lugs beside column end which is a fixed type. Overhead head crane can lift without steel wire.
5, Cross sliders are installed with dust protection unit.
6, Staircases are provided on column for maintenance.
7, The deflection can be removed by grinding & gouge head constant pressure relocation mechanism.
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
Our Services & Strength
A. We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.
B. Based client’s facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.
C. To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.
