Views: 0 Author: Site Editor Publish Time: 2024-06-13 Origin: Site
In recent years, with the rising world oil prices, the development and utilization of natural gas has become the focus, natural gas has become the first choice for countries to solve energy problems, including developed countries and developing countries are committed to the construction of natural gas pipelines.
Engine:
Cummins 6BTA5.9-C210 four stroke, turbocharged, direct electric start, water cooled diesel engine.
Adopting 153KW engine, high power reserve, strong power, stable power generation quality, easy maintenance.
The standard configuration of the engine with improved engine cooling system and large water tank structure has withstood the test of high temperature environment of Indian engineering and low temperature environment of Russian engineering.
The standard equipment has been equipped with air prefilter, by adding air prefilter can filter out 95% of the dust and impurities in the air intake system, can extend the air filter cleaning and replacement time by 6 to 10 times, reduce the early wear and tear of the engine, prolong the service life of the engine, improve the adaptability of the equipment to the environment.
Power generation system:
The generator uses Stanford products of international famous brands.
Rated output power: 125KVA;
Anti-corrosion measures: three anti-paint treatment.
Generator output mode: three phase four wire system.
Power generation system features:
1) Neutral suspension design, zero line is not grounded.
2) The main power generation switch has the functions of preventing phase loss, overcurrent, electric shock and so on.
3) Each phase branch circuit breaker to prevent phase loss, overcurrent, electric shock.
4) All plugs shall be waterproof plugs.
Power division system:
The transmission system adopts direct transmission mode. The main structure principle is to connect the engine, generator, traveling pump and crane pump with output shaft in series (as shown below), in which the generator and traveling pump both have rear output. Compared with the traditional transmission mode, the main advantages are as follows:
It can be seen from the view that the transmission distance between the various functional parts is the shortest, and there is no other external transmission mechanism, the design of the largest reduce the system volume, increase the maintenance and work space, suitable for the welder workstation equipment layout characteristics.
②. Because there is no other auxiliary transmission parts (such as transfer box, etc.), the energy consumption of external transmission parts is avoided and the maintenance and repair work of external transmission parts is reduced. After the after-sales department investigation of this part of the transmission failure statistics for many years is almost zero.
(3) Due to the use of the output of the functional components themselves, the connection is tight, good coordination, improve the stability of the system itself, reduce the noise.
This kind of welding workstation in the form of transmission put into the market after years of practical use, customers generally reflect advanced performance, stable quality, high reliability, welding workstation is the most advanced, energy saving, stable transmission system.
