Why do we choose tank welding machine?

When using the tank welding machine, the operator puts the lamp tube into the fixture, presses the start button, the two pressing cylinders descend to position the workpiece in the ultrasonic mold cavity, and then the ultrasonic welding head acts to trigger the ultrasonic wave, and the welding head carries out the workpiece. After welding and welding, the cylinder drives the upper die to reset, the pressing cylinder rises, and the operator takes out the workpiece to complete one operation.

What are the characteristics of automatic vertical welder?

What is the working principle of tank welding machine?

What is the working effect of tank welding machine?

What are the characteristics of automatic vertical welder?

Automatic vertical welder is high-efficiency automatic welding equipment that uses current feedback closed-loop control of vehicle lift. The thickness of the welded joint can be up to 50mm at one time. Mainly used for thick plate welding in petroleum, chemical, blast furnace, shipbuilding and other industries. EGW vertical gas electric welding machine is a kind of high-efficiency automatic welding equipment improved according to the current feedback closed-loop control welding trolley. The main feature of automatic vertical welder is that the thickness is from 10mm to 50mm in one pass of forced water cooling. At the same time, the molten pool level is automatically controlled, and the wire extension length is automatically adjusted. Small size and light weight welding trolley, flexible and modular, easy to update and easy to use. Widely used in petroleum, chemical, blast furnace thick plate welding and shipbuilding industries.

What is the working principle of tank welding machine?

In most cases, the EGW used in the tank welding machine uses carbon dioxide gas as a protective gas, but sometimes pure argon, argon carbon dioxide mixed gas, argon oxygen mixed gas, and argon helium mixed gas are used. Welding wire is often made of flux wire that creates slag and provides an aesthetically pleasing weld, but sometimes solid wire is used.

Tank welding machine surrounds the molten pool with the base metal end and copper lining or refractory lining material, and can perform vertical upward welding while preventing dripping of molten metal, so it can be welded in a single pass (single operation) Welding of thick plates. Its applications include welding of vertical butt joints such as ship side outer panels, bridge construction, storage tanks, pressure vessels, etc.

What is the working effect of tank welding machine?

Tank welding machine is usually used for welding thicker materials such as low carbon steel and medium carbon steel, and can also be used for welding austenitic stainless steel and other metal alloys. The thickness of the plate is 12~80mm the most suitable. If it is larger than 80mm, it is difficult to obtain a sufficient and good protective effect, resulting in pores in the weld, uneven penetration and incomplete penetration. The length of the welded joint is generally unlimited. Single-layer welding is the most commonly used welding method, but multi-layer welding can also be used.

Complete after-sales service, WINCOO ENGINEERING CO., LTD can provide online and offline technical support, not only video guidance, but also on-site guidance, want to know more about high efficiency pipeline construction equipment, horizontal pipeline construction equipment, stainless steel pressure vessel, etc.