What are the types of tank welding machines?

Tank welding machines are actually transformers with lower external characteristics, which convert 220V and 380V alternating current into low-voltage direct current. Electric welding machines can generally be divided into two types according to the output power source. Therefore, tank welding machines can be divided into many types according to different characteristics.

 

Here is the content list:

l Tank welding machines are classified according to power characteristics.

l What types of tank welding machines does WINCOO have?

l What are the classifications of tank welding machines based on the market industry?

 

Tank welding machines are classified according to power characteristics

One type of tank welding machine is AC power and the other is DC power. A DC welding machine can be said to be a high-power rectifier. It is divided into positive and negative poles. When AC power is input, it is transformed by a transformer, and then rectified by the rectifier, and then outputs a power source with reduced external characteristics.

 

The output terminal will produce huge voltage changes when it is switched on and off the tank welding machines. When the two poles are short-circuited momentarily, the arc is ignited, and the generated arc is used to melt the electrode and welding material, and after cooling, the purpose of combining them is achieved. Welding transformers have their own characteristics. The external characteristic is the sharp drop in voltage after the electrode is ignited.

 

What types of tank welding machines does WINCOO have

WINCOO provides automatic tank welding machines for tank manufacturing applications. Unlike other tank welding machines on the market, WINCOO AGW comes standard with a dual drive system and other features unique to our machines.

 

This automatic submerged arc welding system can reduce on-site tank welding time by 40% and reduce welding defects by increasing the arc on time. These models run directly on the fuel tank and carry the operator, eliminating the need for scaffolding, while ensuring the comfort and safety of the operator.

 

Due to the modular design, tank welding machines are suitable for single-wall or double-wall storage tanks constructed from top-down or bottom-up. Our design allows us to provide customized units for special applications.

 

EGW vertical gas-electric tank welding machines are highly efficient automatic welding equipment, which can control the improvement of the welding frame according to the current feedback closed loop. In a water-cooled forced welding seam, the main feature of a forming is the thickness from 10mm to 50mm.

 

The liquid level of the molten pool is automatically controlled, and the wire length is automatically adjusted. Small size, light weight welding frame and easy to update flexible modularization, easy to use. Widely used in petroleum, chemical, blast furnace thick plate welding and shipbuilding industries.

 

What are the classifications of tank welding machines based on the market industry

There is no authoritative classification method for the classification of tank welding machines. The following classification is mainly based on the simple classification of the industry use on the market:

1. The tank welding machines mainly used by industrial and mining enterprises are: AC arc welding machine, DC electric welding machine, argon arc welding machine, carbon dioxide shielded welding machine, butt welding machine, spot welding machine, submerged arc welding machine, high frequency welding machine , Flash butt welding machine, pressure welding machine, butt welding machine, laser welding machine, AC welding machine and DC welding machine

2. There are two types of DC tank welding machines: one is to install rectifier components on the basis of AC motor, and the other is DC generator. DC welding machines mainly weld non-ferrous metals and pig iron. The AC welder mainly welds steel plates.

3. Argon arc welding machine, carbon dioxide protection welding machine, high frequency welding machine, flash butt welding machine. The argon arc welding machine and carbon dioxide shielded welding machine can mainly weld thin plates and non-ferrous gold layers below 2mm. The flash butt welding machine mainly connects copper and aluminum joints and other objects, and the high-frequency welding machine mainly welds steel pipes in the pipe factory.

4. Submerged arc welding mainly welds thick steel structure materials such as steel structural parts, bridge H steel, and I-beam beams.

5. Gas shielded welding: argon arc welding, carbon dioxide shielded welding, will not be oxidized when welding under the protection of gas, melting welding is firm, non-ferrous metals, thin materials can be welded.

6. Laser welding machine: can weld the leads inside the transistor.

7. Butt welding machine: the iron ropes and other objects on the anchors of the cable chain factory are mainly welded. It can be docked with Yuangang etc.

8. Multifunctional tank welding machines.

9. Spot welding machine.

10. Butt welding machine.

11. Bolt welding machine.

12. Carbon dioxide and ammonia gas welding machine.

 

Wincoo Engineering Co. Ltd (WINCOO) is committed to providing customers, manufacturers, and companies with the most suitable tank welding machines, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and other industrial fields.

 

The tank welding machines we provide are not only suitable for automatic tank welding machines for tank manufacturing. Unlike the existing tank welding machines on the market, the MSHW series comes standard with a dual drive system. Tank welding machines are suitable for the inner and outer welding of single-layer or double-wall storage tanks from top to bottom or bottom to top. Greatly reduce welding defects and save tank installation costs!If you want to know more about high-quality pipe spool fabrication lines, you can also contact us at any time.