This browser does not support the video element.
Simple unfixing Holding -latch hydraulic Jack is a double acting hydraulic jack (also known as hydraulic lifting machine) with upper and lower clamping heads divided into two bodies. It is suitable for lifting construction of various large storage tanks (steel) or other heavy objects.It needs to cooperate with the lifting rod to achieve reciprocating lifting work.
1, Hydraulic lifting is stable, safe and reliable. The system adopts uniform control and single or partial (several) adjustment can be realized, so the lifting process is relatively stable. Characteristics of unfixing jack determine its good self-locking performance, without tank or heavy object gliding or falling due to power outage, which ensures safe and reliable hydraulic lifting.
2, Construction quality is guaranteed. Lifting height can be precisely controlled because of adjustable function (slightly descending). Welding quality if rank is guaranteed for the reasons given above.
3, Equipment is easy for operation with good working environment and efficiency.
4, The equipment has good adaptability. This set of equipment is applicable to hydraulic lifting of large-scale storage tanks with various volumes ranging from tens of thousands of cubic meters only by regulating hydraulic hoist (unfixing jack, hoisting frame, lifting rod, etc.).
5, Hydraulic pump station can be arranged at proper position as per actual working conditions. For large scale storage tanks, hydraulic pump station can be placed inside the tank, outside the tank or space between two tanks (when one pump station controls two tanks installation) for construction control.
6, Hydraulic pump station has manual and automatic controls with apparent features as strong adaptability and good technical performance price ratio.
7, Short construction period, low cost and good economic returns. Due to high modernization of package unit and fast lifting speed, the unit has low construction cost and good economic returns. The techniques has such advantages as easier for centralized control, convenient operation, safety and reliability (no falling), precise control of weld clearance and lifting height, which guarantees project quality, saves labor and reduces cost with remarkable economical benefit.
8, Unfixing jack is widely used in project installation due to its scientific structural design. The jack is composed of upper clamp, oil cylinder, lower clamp and support. Upper and lower clamps are equipped with self locking device. Upper clamp automatically locks lifting rod when oil cylinder ascends and lower clamp automatically loosens. During stroke return, upper clamp loosens and lower clamp locks lifting rod, thus, lifting rod cannot descend and lift heavy object to designated height step by step. The heavier the object is, the tighter the locking device locks. Heavy objects will not fall even during sudden power cut or oil pipe burst. This lifting mode is proven to be safe and efficient with low cost compared with pneumatic jack, big stroke jack and high altitude stranded wire lifting. These modes are not comparable to unfixing jack in terms of safety and practicability and it is the optimal product and installation for substitution. Unfixing jack is rapidly developed and applied in inversed lifting installation of storage tanks, power plant absorption tower and stack steel lining. This jack has slight descending function, which is convenient for plate to plate butt weld. As long as chaining fixing of support and lifting point are sufficient for bearing object load, the jack can lift object to designated place safely and efficiently.
SQD-XXX-100S.F Hydraulic jack
Model | Rated lifting weight | Theory lifting weight | Rated oil pressure | Single hydraulic stroke | Lifting height | Glissade capacity |
SQD-120-100S.F | 120KN | 123KN | 18Mpa | 100±0.5mm | 2.6m | ≤5mm |
SQD-160-100S.F | 160KN | 163KN | 20Mpa | 100mm | 2.6m | ≤3mm |
SQD-250-100S·F | 250KN | 253KN | 25Mpa | 100mm±1mm | 2.6m | ≤3mm |
SQD-350-100S·F | 300KN | 303KN | 20Mpa | 100mm | 2.6m | ≤3mm |
SQD-500-100S.F | 500KN | 503KN | 25Mpa | 100±0.5mm | 2.6m | ≤5mm |
SQD-1000-200S·F | 1000KN | 1003KN | 20Mpa | 150mm | 2.6m | ≤3mm |
Pump station
Model | Maximum pressure | Power | Rated oil flow | Motor rotate speed | oil tank capacity | System oil type |
YB-40 | 25Mpa | 11kw | 40L/min | 1470r/min | 240L | L-HM46# antiwear hydraulic oil |
YB-60 | 25Mpa | 18.5kw | 60L/min | 1470r/min | 400L | |
YT-90 | 25Mpa | 30kw | 90L/min | 1470r/min | 400L |
Jack support
Model | Total height | Lifting rod height | Slider stroke | Lifting rod diameter | Distance between expansion loop support to ground |
TSJ-120-2600L | 3460mm | 3900mm | 2630mm | φ32mm | 310mm |
TSJ-500-2950L | 4040mm | 4700mm | 2950mm | φ60mm*4.7m | 430mm |
Sign up for our newsletter to receive the latest news.
Copyright © 2020 WINCOO ENGINEERING CO.,LTD
Support By:Leadong