How should the tank hydraulic jacking system be maintained?

Anyone with a little mechanical knowledge knows that energy can be transformed into each other. It is best to apply this knowledge to the tank hydraulic jacking system to explain the power loss of the hydraulic system. Next, we will introduce in detail how to maintain the tank hydraulic jacking system.

 

Here is the content list:

l Maintain the tank hydraulic jacking system from the perspective of power source.

l Maintain the tank hydraulic jacking system from a pressure perspective.

l Maintain the tank hydraulic jacking system from the perspective of speed regulation.

 

Maintain the tank hydraulic jacking system from the perspective of power source.

On the one hand, the power of tank hydraulic jacking system will cause energy loss and reduce the overall efficiency of the system. On the other hand, this part of the energy lost will be converted into heat energy, which will increase the temperature of the hydraulic oil and the deterioration of the oil. The tank hydraulic jacking system is malfunctioning. Therefore, when designing a tank hydraulic jacking system, under the premise of meeting the requirements of use, full consideration should be given to reducing the power loss of the system.

 

First of all, considering the power source-pump, considering the diversified working conditions of tank hydraulic jacking system actuators, sometimes the system requires large flow and low pressure; sometimes it requires small flow and high pressure.

 

Therefore, it is appropriate to choose a pressure-limiting variable pump, because the flow rate of this type of pump changes with the change of the system pressure. When the tank hydraulic jacking system pressure decreases, the flow rate is relatively large, which can satisfy the fast stroke of the actuator. When the tank hydraulic jacking system pressure increases, the flow rate decreases accordingly, which can meet the working stroke of the actuator. This can not only meet the working requirements of the actuator, but also make the power consumption more reasonable.

 

Maintain the tank hydraulic jacking system from a pressure perspective.

Second, when hydraulic oil flows through various types of hydraulic valves, there will inevitably be pressure loss and flow loss. This part of the energy loss occupies a large proportion of the total energy loss.

 

Therefore, reasonable selection of hydraulics and adjustment of pressure valve pressure are also an important aspect of reducing power loss. The flow valve is selected according to the flow adjustment range in the tank hydraulic jacking system and its minimum stable flow can meet the requirements of use. The pressure of the pressure valve should be as low as possible when the hydraulic equipment is working normally.

 

Maintain the tank hydraulic jacking system from the perspective of speed regulation.

Third, if the actuator has speed regulation requirements, when selecting a speed regulation loop, it is necessary to meet the speed regulation requirements while minimizing power loss. The speed control circuits of common tank hydraulic jacking system mainly include: throttle speed control circuit, volume speed control circuit, volume throttle speed control circuit.

 

The throttling speed control loop in the tank hydraulic jacking system has large power loss and good low-speed stability. The volumetric speed control circuit has neither overflow loss nor throttling loss, which has high efficiency but poor low-speed stability. If the tank hydraulic jacking system needs to meet both requirements at the same time, a volume throttling speed control circuit composed of a differential pressure variable pump and a throttle valve can be used, and the pressure difference between the two ends of the throttle valve should be as small as possible to reduce pressure loss.

 

In summary, a reasonable choice of hydraulic pressure is crucial. When the hydraulic oil flows in the pipeline, it will exhibit viscosity, and when the viscosity is too high, it will generate greater internal friction, causing the oil to heat up, and at the same time increase the resistance when the oil flows. When the viscosity is too low, it is easy to cause leakage, which will reduce the volumetric efficiency of the tank hydraulic jacking system.

 

Therefore, generally choose oil with suitable viscosity and good viscosity-temperature characteristics. In addition, when the oil flows in the pipeline, there are pressure loss and local pressure loss along the way. Therefore, when designing the tank hydraulic jacking system pipeline, the pipeline should be shortened as much as possible while reducing the number of bends.

 

The above are the recommended maintenance points to avoid the power loss of the oil tank hydraulic jacking system. However, there are many factors that affect the power loss of the tank hydraulic jacking system. Therefore, if specific maintenance is performed on the storage tank hydraulic jacking system, other requirements should be considered comprehensively!

We also have many products about Tank welding machine and Pipe spool fabrication solution, welcome to consult us!