This browser does not support the video element.
A simple, inexpensive and easy to use straight or flexible rail welder for tank welding.
This machine has the following features:
I. Product welding features
1, Equipped with 5 kinds of welding handling techniques, perfect simulation of manual handling, uniform appearance of welding seam, faster and more stable.
2, Weld width 0-30mm wide range adjustment, can adapt to all kinds of thin plate, thick plate welding.
3, Weld width 0-30mm wide range adjustment, can adapt to all kinds of thin plate, thick plate welding.
4, The machine can realize all kinds of distance discontinuous welding, length and speed can be adjusted at will.
5, The machine can demonstrate welding trajectory without ignition, convenient and intuitive.
6, Control panel is full digital display, easy to adjust and record data, with memory function, automatic recovery of the last data when the next use.
7, Automatic stop after welding, limited stop contact is set in the two running directions of the machine, contact point is placed at the end of the weld in advance, automatic stop at the point to prevent over-welding.
II. Product designed features
1, The sliding track of the machine adopts the linear track specially used for advanced machine tools, which has zero clearance operation, smooth running, no stuck, no deformation, and higher integrity of the machine.
2, All directions of the machine are adjusted by high precision screw pitch, faster, more stable and more accurate.
3, All the parts are processed by advanced CNC machine tools, which greatly improve the accuracy and durability.
4, The whole high temperature spraying process + aluminum oxidation, so that the overall appearance of the machine to a higher level.
5, Equipped with special robot welding gun, welding quality is better and more stable.
III. Product overall using features
1, The machine is integrated design, easy to use, while reducing all kinds of messy external control lines, effectively prevent damage to the line and control, make the working environment more concise.
2, The lengthened magnetic seat on the track reduces the weight and number of switches with the same suction force, making it easy to install even for a woman.
3, The design of the special connecting plate for the track end is noteworthy. The bolt is used in the forward direction, which can connect two or more tracks into a longer whole. Bolt reverse use, can make the track fast, accurate lap, so that the length of infinite cycle.
4, Machine drive and control all adopt AC 20V voltage, more safe.
5, The professional welding gun used by this machine can be adapted to different welding gun joints, no matter you are using other welding machine, can be used perfectly.
6, The machine comes with toolbox is our company's original creation. The tool box is easy to use and durable. Some necessary small tools are stored in the tool box, which can reduce the time for users to search for tools and improve work efficiency. It is equipped with: fuse, welding gun conductive nozzle, all kinds of inner square Angle wrench, box ruler, notepad, pen, etc. When a perfect weld is adjusted, the weld parameters, the voltage and current of the welding machine and various parameters on the control panel of the machine are recorded. When the same weld is encountered next time, input parameters and perfect copy of the weld.
7, Flexible and convenient to use, non-welder can weld a perfect weld, one person can operate more than one machine at the same time, greatly reduce labor costs, improve the quality of weld, improve work efficiency
| Items | Parameter | Note | |
| Straight rail type | Soft rail type | ||
| External power source | AC 220V 50/60 Hz | Three-hole | |
| Working power source | AC 20V | Use of each driver | |
| Dimensions | 245*520*280cm | 245*520*290cm | Length*width*height |
| Weight | 8.6kg | 10.4kg | Main engine |
| Track type | Linear motion guide | Self-aligning flexible slide rails | |
| Drive mode | Gear drive | Sprocket drive | |
| Welding speed | 0~1650mm/min | Fastest | |
| The thinnest adsorption plate thickness | 3mm | Magnetically attractive metal | |
| Welding gun adjustment range | 65mm | Inching for up and down | |
| 80mm | Inching for left and right | ||
| + 60° | Swinging angle | ||
| + 25° | Marching Angle | ||
| Stop left, stop right | Swinging form | ||
| Operating function | 0-100mm/min | Swinging speed | |
| 0-2.5s | Left and right residence time | ||
| +14mm | Swinging width | ||
| +5mm | Center for compensation | ||
Straight Rails Installation:
Step 1: Use 6 M4X12 hexagon socket screw to install 3 sets of magnet seats on the track. Note that the magnet handle is in the rack direction. The track is assembled. Another set of tracks can be overlapped on the end connecting plate and used indefinitely.
Step 4: Install the welding robot host on a track from one end of the track, pay attention to the walking clutch in the open position. The clutch is in the closed position when used.
Flexible Rails Installation:
Step 2: Mount 3 sets of magnets to 3 magnet positions in the middle of the track using 12 M6X16 flat head bolts. Tighten.
Step 3: Release the track clutch, install the welding robot on the track, close the clutch, and the host can slide on the track. Release or close the walking clutch, the main engine can run normally when in use.
Step 5:Install the pressing plate, ultra-thin flat pad and soft rail on the magnet aluminum block with 3 M6X16 flat bolts in turn, tighten and assemble the track. Another set of track ends can be inserted under the platenfor infinite circulation.
Step 6:Adjust the external auxiliary to a reasonable height, the external auxiliary has been sliding on the welding gun to support during welding, can effectively prevent the welding gun high and low or shake.
Straighten rails
Flexible Rails
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipment for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
Our Services & Strength
We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.
Based client's facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.
To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipment/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.
Q:Are you a factory or trading company?
A, Yes we are the trading company,but we have a lot of factories that have cooperative relationships, and we can get the best plan and price for you.
Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent
Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.
Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.
Q:What's the Payment method?
A:T/T,L/C and other payment method, Depend on customer.
Q: What is our payment term?
A:We can accept the payment by T/T and Trade assueance .
Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine.
Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.
Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .
we wish to know the below:your details address,phone/fax number,destination,transportation way;Product informaiton:item number,size,quantity,logo,etc
Sign up for our newsletter to receive the latest news.
Copyright © 2020 WINCOO ENGINEERING CO.,LTD
Support By：Leadong