What is the working process of hydraulic storage tank lifting equipment?

Hydraulic storage tank lifting equipment plays a very important role in handling heavy objects. The lifting effect is very good. It is more suitable for lifting heavy objects with a low height and can undertake a lot of lifting operations.

What are the precautions for hydraulic storage tank lifting equipment?

What should I do if the platform of the hydraulic storage tank lifting equipment lift cannot be lowered?

What is the working process of hydraulic storage tank lifting equipment?

What are the precautions for hydraulic storage tank lifting equipment?

1) If the emptying phenomenon occurs during use, you can first loosen the oil drain screw on the pump body, hit the vertical head of the pump body down a few times, and then tighten the oil drain screw, you can continue to use the hydraulic storage tank lifting equipment.

2) When using, do not add partial load or overload, so as to avoid the danger of hydraulic storage tank lifting equipment damage. When there is a load, do not remove the quick connector to avoid accidents and damage to the parts.

What should I do if the platform of the hydraulic storage tank lifting equipment lift cannot be lowered?

When using hydraulic storage tank lifting equipment lift, sometimes the lifting platform cannot be lowered. The solution to the hydraulic storage tank lifting equipment lift not being lowered depends on the situation:

1. The drop valve fails,

Troubleshooting method: In the case of pressing the down button, check whether the down valve has electricity. If there is no electricity, try to eliminate it; if there is electricity, then eliminate the failure of the down valve itself and replace the drop valve.

2. The deceleration control valve is out of balance

Remedy: Adjust the descending speed control valve, if the adjustment is invalid, you need to replace the new valve.

What is the working process of hydraulic storage tank lifting equipment?

When the hydraulic storage tank lifting equipment is stretched, the front and rear oil nozzles are opened, and oil is supplied from the rear oil nozzle to the tensioning working oil chamber, and the cylinder body of the tensioning cylinder moves backward. Since the cylinder cable is anchored on the tool anchor at the top of the jack, the hydraulic storage tank lifting equipment stretches the steel cable through the tool. When the wire rope is stretched to the required length, close the rear oil nipple, and feed oil from the front oil nipple into the top pressure cylinder, so that the top pressure cylinder piston moves forward to support the anchor plug, and the anchor plug is pressed into the anchor ring. Thus, anchoring the cable. Open the rear oil nozzle and continue to feed oil from the front oil nozzle. At this time, the tension cylinder moves forward and the oil in the cylinder returns. Finally, open the front oil nozzle to make the oil in the top pressure cylinder return, and the top pressure piston returns to its original position due to the action of the return spring.

After reading the above information, are you interested in it? If you also want to order a fully hydraulic storage tank lifting equipment, please contact WINCOO ENGINEERING CO., LTD.