What is the meaning of H beam straightening and welding machine?

H-beam is a general term for the construction of beams or columns used in civil engineering. Since all parts of H-beam are arranged at right angles, H-beam has strong bending resistance in all directions, simple construction, cost saving and has the advantages of light structure and light weight, and has been widely used. H beam straightening and welding machine also plays an irreplaceable role in the production process of H-beam.

How to deal with the distortion of steel when H beam straightening and welding machine encounters it?

What is the function of H-beam straightening welding machine?

What is the product feather of H-beam straightening welding machine provided by WINCOO ENGINEERING?

How to deal with the distortion of steel when H beam straightening and welding machine encounters it?

Use H beam straightening and welding machine to weld H-beam distortion treatment method: If the H-beam flange has out-of-tolerance torsion, it means that the H-beam has distortion that needs to be corrected. The upper flange of the H-beam can be inspected with a level ruler. First, adjust and ensure that the level of most of the flanges of the H-beam body is within the deviation range, measure the excess part and correct it accordingly. Measurement method: The frame level is placed in the width direction of the detection flange, and the feeler gauge is used to pad the lower side to the level, and the reading of the feeler gauge can be used to know how much the twist is. Or use a spirit level to directly measure two points on the width edge of the flange with a ruler, and the difference between the readings is the torsion value.

What is the function of H-beam straightening welding machine?

H-beam straightening and welding machine is special equipment for H-beam assembling, welding and straightening. It completes the process on one piece of equipment through assembling machine, welding machine and straightening machine, which improves production efficiency, reduces equipment cost and saves money. cost. Space equipment installation is efficient production equipment for H-beam and T-beam. A variety of welding methods can be used for single arc single wire welding, single arc double wire welding, or submerged arc welding according to the actual needs of users. Lubricate in time, so as to achieve good lubrication, reduce wear and prolong the service life of equipment.

What is the product feather of H-beam straightening welding machine provided by WINCOO ENGINEERING?

1. The PHJ type H-beam straightening welding machine is a new type of high-efficiency equipment in the H-beam production process.

2. It is mainly composed of main engine, input conveyor, output conveyor, tie rod centering system, welding power, hydraulic system, electric control system, etc.

3. The host is the core of the machine, which consists of the upper gantry and the lower base assembly. The upper gantry can press the support beam web; 4 sets of guide rail guide system, the guide is stable and reliable.

4. The positioning of web and flange adopts hydraulic transmission. Both sides are mechanical synchronous clamping and centering system to realize automatic positioning and centering. An eccentric wheel for fine adjustment is also designed.

5. During the assembly process of H-beam, the end is equipped with an automatic hydraulic lifting type stopper to ensure that the end of the web is aligned with the end of the flange.

6. The welding torch adjustment device adopts UP/DOWN, LEFT/RIGHT and angle adjustment to ensure that the welding seam is always aligned.

7. The straightening device adopts the downward pressure of the oil cylinder. Strong straightening ability and easy adjustment of straightening ability.

8. The input conveyor belt is 2.6m*3 sections, of which 1 section is electrified. The output conveyor is 11.5m, and two of them are lift type to support H-beam.

9. There is a tie rod system at the input end, a total of 3 tie rod boxes, which are used for one-time centering of the web and flange.

10. Equipped with 1 set of hydraulic system. Hydraulic pumps from professional manufacturers are easy to maintain and have a long service life.

11. The welding power source adopts China MZ1000 or American Lincoln DC-1000, NA-3 welding power source, single arc single wire welding head and control box.

12. Japan Mitsubishi PLC control.

After reading, do you have a deeper understanding of H-beam straightening welding machine? For further information, please contact WINCOO ENGINEERING. We will be very pleased to help you!