What are the steps of using hydraulic storage tank lifting equipment?

Hydraulic storage tank lifting equipment is a jack that uses a plunger or a hydraulic cylinder as a rigid jacking member. It has compact structure, stable operation and self-locking function.

How to properly maintain the hydraulic storage tank lifting equipment?

What reasons may cause the hydraulic storage tank lifting equipment lift to fail?

How does hydraulic storage tank lifting equipment work?

How to properly maintain the hydraulic storage tank lifting equipment?

1) The hydraulic storage tank lifting equipment uses oil as the medium, so the maintenance of the oil and the equipment must be done well to avoid blockage or oil leakage, which will affect the use effect.

2) For a new or long-established hydraulic storage tank lifting equipment, since there is a lot of air in the hydraulic cylinder, when it starts to use, the piston rod may have a small jump phenomenon, and the hydraulic storage tank lifting equipment can be reciprocated with no load. 2 to 3 times to remove the air in the cavity. The hydraulic storage tank lifting equipment that has been idle for a long time will harden due to the long-term non-working of the seal, which will affect the service life of the hydraulic jack. Therefore, when the hydraulic storage tank lifting equipment is not in use, it should be reciprocated 2 to 3 times a month with no load.

What reasons may cause the hydraulic storage tank lifting equipment lift to fail?

1. If the gear pump of the hydraulic storage tank lifting equipment lift is damaged, and the pumped oil has no pressure, it cannot be lifted, and the lift gear pump should be replaced.

2. The support valve or electromagnetic reversing valve of hydraulic storage tank lifting equipment lift fails to operate, and a new support valve or electromagnetic reversing valve needs to be replaced.

3. The manual pump and gear pump of the hydraulic storage tank lifting equipment lift leak oil. If the oil leak is serious, it will lead to insufficient power, and the sealing ring of the lifting oil pump needs to be replaced in time.

4. The circuit of hydraulic storage tank lifting equipment lift is open circuit. The hydraulic system is controlled by the circuit. If the circuit is short-circuited or open, it will also cause it to fail to lift. It is necessary to check the lift button contactor and fuse and other parts.

5. The check valve of the manual pump of the hydraulic storage tank lifting equipment lift is stuck and the return position fails. This kind of failure is more troublesome. The solution is to unscrew the oil pump valve port bolt, repair, clean, and replace the clean hydraulic oil.

How does hydraulic storage tank lifting equipment work?

The principle of hydraulic storage tank lifting equipment is based on Pascal's principle, that is, the pressure of the liquid is the same everywhere so that in a balanced system, the pressure exerted on the smaller piston is relatively small, and the pressure exerted on the larger piston is also relatively large to keep the liquid still.

Therefore, the hydraulic storage tank lifting equipment can obtain different pressures on different ends through the transmission of the liquid, so that a transformation purpose can be achieved. The hydraulic storage tank lifting equipment we see commonly uses this principle to achieve force transmission.

WINCOO ENGINEERING CO., LTD has committed to providing the most suitable hydraulic storage tank lifting equipment at a reasonable price, and whatever it takes to satisfy the customer’s needs.