 |
| Quantity: | |
|---|---|
XBJ
WINCOO
This series machine is a kind of advanced and high efficient milling equipment to prepare the groove of plate before welding instead of planing. Compared with planer, it has the advantages of saving power, low investment and high accuracy of surface finish. It is widely used in the industries as pressure vessel, boiler, ship-building, power plant, petrochemical and machinery, etc.
Compared to the edge milling machine series and the traditional edge milling machine and guide rail installation form is detachable and by heat treatment,bed structure more reasonable,milling head is more stable and reliable operation,the feed and return system is completely independent,return fast speed,high efficiency,cutter convenient angle adjustment,custom knife disc and standard cutter interchangeable is renewal product of traditional milling machine.
Taiwan Driving Motor
In Milling Process
| Model | XBJ-3 | XBJ-6 | XBJ-9 | XBJ-12 | XBJ-15 | XBJ-18 |
| Effective milling zone length(m) | 3 | 6 | 9 | 12 | 15 | 18 |
| Milling angle adjustable(^) | 0-45 | |||||
| Applicable steel pate thickness(mm) | 6-50 | |||||
| Max.milling width by on pass(mm) | 8 | |||||
| Milling travel speed(m/min) | 0.25-0.6 | |||||
| Milling return speed(m/min) | 4 | |||||
| Spindle speed(rpm) | 125-630 | |||||
| Hydraulic pressure(mpa) | >=3.5 | |||||
| Number of clamping shoes(each) | 5 | 8 | 11 | 15 | 19 | 23 |
| Pass height(form FL)(mm) | 900 | |||||
| Feeding motor capacity(kw) | 1.5 | |||||
| Hydraulic motor capacity(kw) | 4 | |||||
This equipment is a large milling machine,and both sides can also edge milling. It has only four power installation head on the tool body to improve processing efficiency.The pressure beam machine adopts moving type. In the process it is convenient for users to feed materials, and after processing easy to laying-off so that improve working efficiency.Comparing with traditional milling machine it is more flexible and high efficiency.
| Model | YXBJ-18 |
| Workpiece thickness | 10-160mm |
| Workpiece width | 300-1100mm |
| Workpiece length | ≤18000mm |
| The traveling speed of milling | 130-1200mm/min |
| Back stroke milling speed | 1500mm/min |
| Working pressure of hydraulic pressure system | 0.5-3.5 Mpa |
| Moving distance | 1000mm |
| Power of driving motor | 1.5kw |
| Power of milling motor | 7.5kw |
| Pressure beam moving motor power | 2x1.5kw |
| Pressure beam Press foot number | 19 |
GMMA-80A automatic edge milling machine, automatic milling in the process of groove processing, reduce the cost of use, reduce labor intensity;With cold cutting operation, there is no oxidation on the groove surface after machining.The surface finish is up to Ra3.2-6.3, which fully meets the requirements of the welding industry. It can be used immediately without burr treatment.This product is pollution-free and easy to operate.
*Can be used for iron and steel,ferrochrome, fine grain steel, aluminum products, copper and aluminum alloy processing.
*Can be used in groove operations of construction machinery, steel structure, pressure vessels, shipyards and aerospace industry .
| Model | GMMA-80A |
| Name | Automatic walking steel plate edge milling machine |
| Processing of materials | All kinds of carbon steel, stainless steel, aluminum, copper and other metal materials |
| Bevel angle | 0°~60°(adjustable) |
| Cutting form | Milling type |
| Total Power | 4800W |
| Motor speed | 1050r/min |
| The blade number | Standard 2 sets (12 pieces in total, including blade screws) |
*Cutting part (milling edge and top bevel only)
| Spindle motor power | 2200W*1 |
| Feed motor power | 400W*1 |
| Spindle motor speed | 1050r/min |
| Spindle and motor | Belt transmission connection |
| Cutter diameter | 80mm |
