 |
| Quantity: | |
|---|---|
SQD Series
WINCOO
Simple unfixing Holding -latch hydraulic Jack is a double acting hydraulic jack (also known as hydraulic lifting machine) with upper and lower clamping heads divided into two bodies. It is suitable for lifting construction of various large storage tanks (steel) or other heavy objects.It needs to cooperate with the lifting rod to achieve reciprocating lifting work.
The jack comprises an oil cylinder and a piston, the upper and lower ends of the oil cylinder are respectively provided with an upper cylinder head and a lower cylinder head, and the upper cylinder head and the lower cylinder head are respectively provided with an oil inlet and outlet hole;The piston is arranged in the middle of the piston rod, the both ends of the piston rod respectively extend out of the upper cylinder head and the lower cylinder head, the piston rod is hollow, and the lifting rod axial through the piston rod, the lifting rod on the upper side and the lower side of the piston rod are respectively provided with a locking device;The locking device comprises a gripping part set on the lifting rod, the gripping part is provided with a large and small conical hole, the inner side of the conical hole is circumferentially provided with a number of wedge blocks;The outer surface of the wedge block is compatible with the conical hole, the inner side of the wedge block is provided with a clamping tooth, the clamping tooth is held on the lifting rod, the wedge block is provided with a circular spring chuck;The spring chuck is provided with a plurality of round holes, a round hole is provided with a reset spring, the upper side of the spring chuck is provided with an annular cover fixed with the grip part, and the both ends of the reset spring are respectively conflicted between the lower end face of the wedge block and the cover;The grip part on the upper side of the locking device is relatively fixed with the upper end of the piston rod, and the grip part on the lower side of the locking device is relatively fixed with the lower cylinder head by the support.
1,Simple jack adopts low relaxation steel strand, as long as there is a reasonable bearing lifting point, lifting height is not restricted;
2,Through the expansion and combination of simple jacks, the lifting weight, span and area are unlimited;
3,Small volume, light weight, large bearing capacity, convenient and flexible installation, especially suitable for small space or indoor large tonnage tank lifting;
4,The simple jack has reverse motion self-locking, which makes the lifting process very convenient, and the storage tank can be locked reliably at any position in the lifting process for a long time;
5,The jack has a high degree of automation, convenient and flexible operation, with automatic operation, semi-automatic operation, single point adjustment, manual operation and other operations.LCD display, touch screen display, button operation panel display, very intuitive.And the control system is equipped with self-correction protection procedures, even if the misoperation will not cause accidents;
6,Using this series of simple unfixing Holding -latch hydraulic Jack, the construction period is short, the cost is low, the economic benefit is good.
SQD-XXX-100S.F Hydraulic jack
Model | Rated lifting weight | Theory lifting weight | Rated oil pressure | Single hydraulic stroke | Lifting height | Glissade capacity |
SQD-120-100S.F | 120KN | 123KN | 18Mpa | 100±0.5mm | 2.6m | ≤5mm |
SQD-160-100S.F | 160KN | 163KN | 20Mpa | 100mm | 2.6m | ≤3mm |
SQD-250-100S·F | 250KN | 253KN | 25Mpa | 100mm±1mm | 2.6m | ≤3mm |
SQD-350-100S·F | 300KN | 303KN | 20Mpa | 100mm | 2.6m | ≤3mm |
SQD-500-100S.F | 500KN | 503KN | 25Mpa | 100±0.5mm | 2.6m | ≤5mm |
SQD-1000-200S·F | 1000KN | 1003KN | 20Mpa | 150mm | 2.6m | ≤3mm |
Pump station
Model | Maximum pressure | Power | Rated oil flow | Motor rotate speed | oil tank capacity | System oil type |
YB-40 | 25Mpa | 11kw | 40L/min | 1470r/min | 240L | L-HM46# antiwear hydraulic oil |
YB-60 | 25Mpa | 18.5kw | 60L/min | 1470r/min | 400L | |
YT-90 | 25Mpa | 30kw | 90L/min | 1470r/min | 400L |
Jack support
Model | Total height | Lifting rod height | Slider stroke | Lifting rod diameter | Distance between expansion loop support to ground |
TSJ-120-2600L | 3460mm | 3900mm | 2630mm | φ32mm | 310mm |
TSJ-500-2950L | 4040mm | 4700mm | 2950mm | φ60mm*4.7m | 430mm |
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.Based client's facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.
1. Support you to win the project during bidding phase. We can provide your more suitable configurations to help you shorten the constrcution time.
2. We can provide all technical documents and advices to support you for construction procedure clearifications
3. We can calculate the most suitable number of hydraulic jack according to the weight of the tank
4. We can provide your suitable hydraulic jack accessories with much more competetive price from our long time business partner if you need.
5. We can provide site people training service, and operation service or manpower service or as a subcontractor.
