How to correctly solve some problems of hydraulic storage tank lifting equipment?

hydraulic storage tank lifting equipment is suitable for various lifting operations with small lifting height. It consists of oil chamber, oil pump, oil storage chamber, piston, crank handle, oil valve and other main parts.

What should I do when there is a problem with the control system of the hydraulic storage tank lifting equipment?

Before using hydraulic storage tank lifting equipment, what should be paid attention to avoid malfunction?

What is the reason why the temperature of hydraulic storage tank lifting equipment is too high and cannot be lifted?

What should I do when there is a problem with the control system of the hydraulic storage tank lifting equipment?

Countermeasures adopted: the hydraulic control system of hydraulic storage tank lifting equipment should be replaced immediately for maintenance due to common failures; maintain the cleaning of the hydraulic transmission system, and clean the filtration system (including the emulsion tank) on time; the key components of the hydraulic control system of the hydraulic press (such as Hydraulic seals) are very damaged to maintain, spring yellow parts should be sampled and tested on time, valves should be tested for characteristics, welding leaks should be repaired after dismantling the internal hydraulic seals, and pressure tests should be performed as required.

Before using hydraulic storage tank lifting equipment, what should be paid attention to avoid malfunction?

1. The weight of the object must be estimated before lifting, and remember to overload it.

2. When using, the center of gravity of the object must be determined, the focus point of the jack should be selected, and the placement should be stable. At the same time, the degree of softness and hardness of the ground must also be considered. If necessary, a tough wooden board should be padded to prevent skewing or even tipping during lifting.

3. This hydraulic storage tank lifting equipment is only used for jacking up. After the heavy object is jacked up, it should be supported by tough support (vehicle support, tough wood or other materials) to prevent the failure of the jack. Danger.

4. If several thousand hydraulic storage tank lifting equipment are used together, the lifting speed should be kept synchronized, and the load of each hydraulic storage tank lifting equipment should also be balanced, otherwise there will be a danger of tipping.

5. hydraulic storage tank lifting equipment should avoid sudden vibration when using it.

What is the reason why the temperature of hydraulic storage tank lifting equipment is too high and cannot be lifted?

The high temperature of the hydraulic storage tank lifting equipment is no problem.

There are several reasons for the high temperature of hydraulic storage tank lifting equipment: 1. Not enough hydraulic oil; 2. Too dirty hydraulic oil; blocked filter element; 3. Low pressure of safety valve; 4. Damaged working pump; In order from easy to difficult to rule out.

With a large number of suppliers, we can choose the right suppliers according to customers' requirements and provide the most cost-effective products. WINCOO ENGINEERING CO., LTD provide big pressure vessel, heavy duty pressure vessel, industrial pressure vessel, automatic pipeline construction equipment, electric vertical tank construction solution, etc.