 |
| Quantity: | |
|---|---|
YT Series
WINCOO
YT Series Hydraulic Tank lifting device is a large-scale equipment specially designed for the national oil reserve project developed suitable steel giant silo tank inversion welding process engineering.
Uses: steel giant silo tank inversion process of welding engineering. It applies to steel tanks height ≤2.5 meters (special plates are negotiable).
Use either: ① vertical lift displacement of the overall structure, the overall building.
② large span roof truss and flip construction of multi-storey buildings.
③ large objects vertical lifting, lifting.
Features: This type of device is a two-stage single-acting hydraulic cylinder (hydraulic jacks) for VTOL work force or return required from back position, it can not use for horizontal work. Structured compact device, Safe and stable, easy to operate, load adjustable, quick installation, high synchronization accuracy.
YT Series Hydraulic Tank lifting device is "dragged five" Oil supply: Each pump station connected to the hydraulic cylinder 5; thus avoiding excessive tubing traditional centralized oil brings,Leakage points more than the disadvantages, to ensure that environmental pollution to a minimum.
YT Series Hydraulic Tank lifting device configuration:1 pumping station, the fuel tank 5 (including hydraulic lifting device components - wire rope, supporting device, rod, etc.)Electric control part (centralized control operation box and power control box).
The device control: centralized automatic control button or a single handle operation control.
YT10-1650 | YT10-1700 | YT12-2700 | YT18-1700 | YT25-3200 | YT25-2700 | YT30-2700 | YT30-3200 | YT40-3400 | YT50-2700 | |
Maximum service pressure | 28 MPa | 28 MPa | 13Mpa | 30Mpa | 20Mpa | 25Mpa | 24Mpa | 30Mpa | 20Mpa | 10Mpa |
Maximum output force | 10 t | 10 t | 12 t | 18 t | 25 t | 25 t | 30 t | 30 t | 40 t | 51 t |
Maximum stroke | 1700 mm | 1700 mm | 2700 mm | 1650 mm | 3200 mm | 2700 mm | 2700 mm | 3200 mm | 3400 mm | 2620 mm |
Lifting speed | 90mm/min | 90mm/min | 160mm/min | 95mm/min | 180mm/min | 180mm/min | 110mm/min | 50mm/min | 80mm/min | 140mm/min |
Oil pump flow | 2×14.4L/min | 2×14.4L/min | 50L/min | 7.2L/min | 14.4L/min | 14.4L/min | 7.2L/min | 7.2L/min | 7.2L/min | 14.6L/min |
Motor speed | 1440r/min | 1440r/min | 1440r/min | 1440r/min | 1440r/min | 1440 r/min | 1440r/min | 1440r/min | 1440r/min | 1440r/min |
Motor voltage | ~380 V | ~380 V | ~380 V | ~380 V | ~380 V | ~380 V | ~415V | ~380 V | ~380 V | ~380 V |
Motor power | 2×5.5kw | 2×5.5kw | 15kw | 4kw | 5.5kw | 5.5kw | 4kw | 4kw | 4kw | 5.5kw |
Working environment temperature | -15~50 ℃ | -15~50 ℃ | 10~50 ℃ | 10~50 ℃ | -10~60 ℃ | 10~50 ℃ | -10~50 ℃ | 0~50 ℃ | 0~50 ℃ | 0~50 ℃ |
Suitable width | 1500mm | 1500mm | 1500mm | 1500mm | 3000mm | 2500mm | 2500mm | 2500mm | 3050mm | 2500mm |
YT series of hydraulic jacking equipment Tank advantage
●The system consists of hydraulic pump station, cylinders, steel wire, and strokes. Easy to installation and operation;
●The system utilizes PLC central control to handle lift. Each power pack is equipped with auxiliary balance device to guarantee the precision of simultaneously lifting.
●Hydraulic lift pump station has subsidiary manual control and central control two operation models. The cylinder can be adjusted to lift separately or to lift with several others as one group, and multi groups can also be integrated to lift reach better precision and better welding effect.
●All the cylinders are with safety valve. It can be automatically locked to avoid cylinder/ tank dropping even under situation of power off, high-pressure hose broken, burst.
●The cylinder is with one high pressure hose to avoid oil leaking that usually happen by the traditional multiple hoses. Cylinder will return to initial condition by itself weight.
●Stroke of Hydraulic cylinder is various as per tank plate width, which can satisfy each annular shell plate one-step lift. Greatly reduce the time waste.
●Hydraulic cylinder basic height is based on the tank shell width, which can match automatic girth welding machine to proceed internal girth seam welding.
● Module configuration, the jacking system quantity can be adjusted as per different size of tank and weight
● High efficiency, each time lifting or falling down only needs around 15 minutes.
●Can well cooperate with our tank welding machines, which can greatly reduce the manpower cost and reduce the construction time;
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
Our Services & Strength
We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.
Based client’s facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.
To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.
