 |
| Quantity: | |
|---|---|
WPB-III
WINCOO
FEATURES: Lower axial and radial clearance,light weight suitable for working at narrow and complicatedsite Can separate to two half,it's easy for the pipe when two end not open.The machines do the cutting and beveling simultaneouslyThe tool not only can process carbon steel, stainless steel and alloy pipe with U,V welding seam,also can process convex flange welded.
APPLICATION RANGE: They are widely used in the fields of petroleum, chemical,natural gas,power supply construction, boiler and nuclear power,such as the project of west gas transporting to east China.
DRIVING TYPE: I. Electric-OCE; II. Pneumatic-OCP; III. Hydraulic-OCH; IV. Numerical Controller-OCS
I. Electric-OCE
The machine is powered by 220V AC high performance motor, the motor frequency is 50Hz, the allowable current is 6 amps, the motor power is 1.5~2 kW, the machine is a lightweight external packaging cutting groove machine device, has the characteristics of simple operation, small radial net space and so on.
| Motor power | 1800W/2000W |
| Working voltage | 220~240V |
| Working frequency | 50~60Hz |
| Working current | 8~10A |
II. Pneumatic(OCP)
| Working pressure | 0.8~1.0Mpa |
| Working air consumption | 1000~2000L/min |
| Single/Double motor drive available | |
III. Hydraulic (OCH)
It is suitable for batch cutting and beveling of large pipes with wall thickness ≤90, driven by hydraulic motor.
| Working power of hydraulic station | 5.5kw,7.5kw,11kw |
| Working voltage | 380V three-phase five wire(others can be customized) |
| Working frequency | 50Hz |
| Rated pressure | 10Mpa |
| Rated flow | 5~45L/min(stepless speed regulation） |
| With 50 meters remote control,PLC control | |
IV. Numerical control(servo) OCS
Imported motor from Germany, high processing efficiency, adjustable speed, more stable performance, with overload protection.
| Servo motor power | 2.3kw~4.0kw(Customized non-standard) |
| Working voltage | 220V/380V |
| Working frequency | 50~60Hz |
| Equipped with remote 50 meter remote start stop | |
| Model | Specification | Outside diameter | Thickness | Speed of cutter head | |
| Standard | Heavy-duty | ||||
| Electric type/OCE Pneumatic type/OCP Hydraulic type/OCH CNC type/OCS METABO/OCM | 89 | 25~89 | ≤30 | 42 r/min | |
| 159 | 65~159 | ≤30 | 20 r/min | ||
| 168 | 50~168 | ≤30 | 18 r/min | ||
| 230 | 80~230 | ≤30 | 15 r/min | ||
| 275 | 125~275 | ≤30 | 14 r/min | ||
| 305 | 150~305 | ≤30 | ≤110 | 13 r/min | |
| 325 | 168~325 | ≤30 | ≤110 | 13 r/min | |
| 377 | 219~377 | ≤30 | ≤110 | 12 r/min | |
| 426 | 273~426 | ≤30 | ≤110 | 12 r/min | |
| 457 | 300~457 | ≤30 | ≤110 | 12 r/min | |
| 508 | 355~508 | ≤30 | ≤110 | 12 r/min | |
| 560 | 400~560 | ≤30 | ≤110 | 12 r/min | |
| 610 | 457~610 | ≤30 | ≤110 | 11 r/min | |
| 630 | 480~630 | ≤30 | ≤110 | 11 r/min | |
| 660 | 508~660 | ≤30 | ≤110 | 11 r/min | |
| 715 | 560~715 | ≤30 | ≤110 | 11 r/min | |
| 762 | 600~762 | ≤30 | ≤110 | 11 r/min | |
| 830 | 660~830 | ≤30 | ≤110 | 10 r/min | |
| 914 | 762~914 | ≤30 | ≤110 | 10 r/min | |
| 1066 | 914~1066 | ≤30 | ≤110 | 10 r/min | |
| 1230 | 1066~1230 | ≤30 | ≤110 | 10 r/min | |
| 1430 | 1230~1430 | ≤30 | ≤110 | 8 r/min | |
| Model | d(mm) | D(mm) | L(mm) |
| 89 | 95 | 300 | 160 |
| 168 | 185 | 480 | 178 |
| 230 | 236 | 535 | 178 |
| 275 | 283 | 584 | 178 |
| 305 | 316 | 608 | 178 |
| 325 | 334 | 636 | 178 |
| 377 | 386 | 690 | 178 |
| 426 | 438 | 744 | 180 |
| 457 | 466 | 772 | 180 |
| 508 | 518 | 828 | 190 |
| 560 | 570 | 878 | 190 |
| 610 | 620 | 928 | 190 |
| 630 | 643 | 965 | 190 |
| 660 | 670 | 978 | 190 |
| 715 | 720 | 1050 | 190 |
| 762 | 772 | 1110 | 190 |
| 830 | 840 | 1174 | 192 |
| 914 | 928 | 1260 | 212 |
| 1066 | 1078 | 1513 | 212 |
| 1230 | 1248 | 1584 | 212 |
| 1430 | 1438 | 1784 | 220 |
1.1 Standard tool slide
Special for heavy walled pipe,especially for power plant with special tool bits,ahineve cut/bevel up to 70mm wall thickness in multi passes.
Suitable for ultra-thick pipe processing, the maximum wall thickness is not more than 110 mm
Complete with counterbore/I.D beveling tool,I.D beveling angle available for adjust.Special for heavy walled pipe ,achieve cut/bevel up to 110mm wall thickness in multi passes,also can process flange facing.
1.4 Tracking tool slide
It is suitable for high precision machining or roundness compensation of deformed pipe with diameter greater than 700 mm.
O.D tracking slide compensate for out-of-round pipe travel along the O.D makes the bevel face balanced.Usually apply on large size diameter pipe.
1.5 Universal counter boring tool slide
Used for pipe inner wall processing
Performs inside beveling and counter boring.
Tool feed:Manually
Max.travel:70mm
1.6 Tool holder for pipe outer wall machining
It is used for trimming the outer wall of pipe to remove the rotting layer
Pipe outer wall axial processing tool post to removal of anti-corrosion layer and turning.
2.1 Ordinary type hydraulic station
| Power supply | 5.5kw |
| Working voltage | 380V,3PH,5Lines |
| Working frequency | 50Hz |
| Rated working pressure | 10Mpa |
| Rated flowing | 25L/min |
| Open way | Manual/Remote control |
| Oil line length | 6m(Standard) |
| Net weight | 220kg |
2.2 PLC Type Hydraulic Station
| Power supply | 5.5kw |
| Working voltage | 380V,3PH,5Lines |
| Working frequency | 50Hz |
| Rated working pressure | 10Mpa |
| Rated flowing | 5~30L/min |
| Control system | PLC control |
| Working speed | Remote control |
| Control panel | Electric display |
| Open way | Manual/Remote control |
| Oil line length | 6m(Standard) |
| Net weight | 239kg |
2.3 Explosion-proof Hydraulic Station
| Power supply | 5.5kw |
| Working voltage | 380V,3PH,5Lines |
| Working frequency | 50Hz |
| Explosion-proof grade | BT4/CT4 |
| Rated working pressure | 10Mpa |
| Rated flowing | 25L/min |
| Open way | Manual/Remote control |
| Oil line length | 6m(Standard) |
2.4 Diesel Power Hydraulic Station
| Engine power | 22HP(15kw) |
| Rated working pressure | 10Mpa |
| Rated flowing | 50L/min |
| Open way | Manual control |
The body design is compact,occupies little space,installs and disassembles easily. CNC or hydraulic drive can also be selected according to the thickness and size of the pipe.
